Contact Us

Tel:+86-755-23027080

Fax:+86-755-23027080

Mob:+86-13528409815

E-mail: info@hsdcurtainwall.com

Add: Add:3rd Floor, Flat C Baoan Building, Yintian Rd, Baoan District, Shenzhen City, China
Contact:Michael Chan.

Home > News > Content
How To Maintain Aluminum Windows? Jul 24, 2017



How to maintain Aluminum Windows?

Summer arrives, household many supplies need careful maintenance, otherwise in damp summer easy to produce undesirable change, affect the service life. The aluminium window of household also is so, need to take good care.

The window maintenance of aluminium is clever

1. The Aluminum Windows is in use, the movement should be light, push pull the nature; If you find it difficult not to push hard, you should troubleshoot. Ash, deformation is the main reason for the difficulty of Aluminum Windows push-pull, keep the door frame clean, especially the cleaning of the push trough. Use vacuum cleaner to absorb the ashes of the slot and door seal.

2. When cleaning the Aluminum Windows, do not step on the aluminum frame, or hold the frame for support.

3. Aluminum Windows can be used for soft cloth with water or neutral detergent, do not use ordinary soap and washing powder, and can not be used for detergents such as cleaning powder, toilet powder, etc.

4. After the rain, dry the wet glass and the window frame, and pay special attention to the water. Use long, friction force increase, can add a little oil or coat a layer of fire wax.

5. Always check the connection parts of the aluminum alloy frame, tighten the bolts in time and replace the damaged parts. Locate shaft pin, wind support, ground spring and other aluminium window vulnerable position, should check regularly, add lubricants regularly to keep clean, flexible.

6. The seal and glass seal are the key structures to ensure the sealing and insulation of doors and Windows. If any, it should be repaired and replaced in time.

7. Check the wall of aluminum alloy frames frequently. If it is loose, the frame will be completely deformed, so that the doors and Windows cannot be closed and sealed. Therefore, the screw loose in the connection should be immediately fastened, such as the screw base loose, the application of epoxy strong glue to set up a small amount of cement.

Summer is hot, high temperature from door and window to spread indoor, even if drive air conditioning, also can produce high electric charge because of heat. Actually excellent Aluminum Windows can have very good thermal insulation effect, main characteristic is as follows:

1. Bridge window

A noun is broken bridge aluminum alloy industry, because aluminum alloy material itself is very easy to heat, so someone to disconnect from the aluminum alloy, plastic connection, which became a broken bridge aluminum alloy. Because the aluminum alloy inside and outside does not have direct contact, so cannot pass heat, indoor nature won't become hot accordingly.

2. Double layer insulating glass

We know that the insulating glass insulates the noise, and he can isolate the heat. Because there is a vacuum between the two pieces of glass, there is no contact, and the heat is naturally blocked.

3. Louver window

The heat insulating glass produced by the sunlight comes down only to reduce, not eliminate, the requirement of high customer can choose louvane type aluminium window, through the hundred leaves block the sunlight to enter. \

4. Use the Aluminum Windows with a sealed strip

Sealing strips around the Windows can block the flow of outdoor air and allow the heat to penetrate. There are also more rain in summer, and the seal can help you solve problems such as seepage.

Market low price Aluminum Windows usually does not have very good thermal insulation performance, consumer needs to know about the relative situation to buy with the salesman, do not be greedy for a short time cheap.

Inquiry

Your Name:
*E-mail:
Phone:
Company:
Title:
*Content: